Cisco SFE2000P 24-Port 10/100 POE Ethernet Switch

The Cisco^® SFE2000P 24-Port 10/100 Ethernet Switch (Figure 1) is optimized for maximizing system availability, with fully redundant stacking and dual images for resilient firmware upgrades. The Cisco SFE2000P is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-service (DoS) prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure clear and reliable voice and video communications.

For wireless or voice over IP (VoIP) deployments, the Cisco SFE2000P supports the IEEE 802.3af standard for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. A maximum of 15.4W is available on the Fast Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets, with a maximum per-device PoE delivery of 180W available for all ports.

The Cisco SFE2000P includes an intuitive, secure management interface, enabling you to better utilize the switch’s comprehensive feature set, resulting in a better-optimized, more secure network.

Features

●   Twenty-four 10/100 Ethernet ports plus four 10/100/100 copper ports

●   Two Small Form-Factor Pluggable (SFP) slots (shared with two copper ports) for fiber Gigabit Ethernet expansion

●   IEEE 802.3af PoE delivered over any of the twenty-four 10/100 ports

●   Maximum per-switch PoE delivery of 180W for all

●   Dual images for resilient firmware upgrades

●   12.8-Gbps, non-blocking, store-and-forward switching capacity

●   Simplified quality of service (QoS) management using 802.1p, Differentiated Services (Diffserv), or type of service (ToS) traffic prioritization specifications

●   Fully resilient stacking provides optimized growth with simplified management

●   ACLs for granular security and QoS implementation

●   Can be configured and monitored from a standard web browser

●   Secure remote management of the switch via Secure Shell (SSH) Protocol and Secure Sockets Layer (SSL) encryption

●   802.1Q-based VLANs enable segmentation of networks for improved performance and security

●   Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks

●   Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)

●   User/network port-level security via 802.1X authentication and MAC-based filtering

●   Increased bandwidth and added link redundancy with link aggregation

●   Enhanced rate-limiting capabilities, including back pressure, multicast, and broadcast flood control

●   Port mirroring for noninvasive monitoring of switch traffic

●   Mini jumbo frame support (1600 bytes)

●   Simple Network Management Protocol (SNMP) v1, v2c, v3 and Remote Monitoring (RMON) support

●   Fully rack-mountable using the included rack-mounting hardware

●   Simple one-step automated installation and initial configuration