iDCS 100 / 500

2 x 4 DLI This card provides two Caller ID-compatible loop start C.O. interfaces and four 1B+D DLI ports. KDb’s cannot be used with this card. This is the same card used on the DCS Compact and 50si.

2 x 4 SLI This card provides two Caller ID-compatible loop start C.O. Lines, four SLI ports for industry standard single line telephones and the ability to provide a loop disconnect signal.   NOTE: This card does not provide OPX protection. This is...

MISCELLANEOUS FUNCTION MODULE (MISC) The Miscellaneous Function Module (MISC) daughter board installs in position MCP2-D3 on the MCP2 card in a single cabinet system or in position SCP2-D2 on the SCP2 or position LCP2-D2 on the LCP2 card(s) in a multiple...

SWITCH AND CONFERENCE MODULE (SCM) The Switch and Conference Module installs on the MCP2 or the SCP2 processor cards. In a single cabinet system the SCM can be installed in MCP2-D1, however in a multiple cabinet system the SCM must be installed on the...

Overview This cable is used for connecting the iDCS 500 expansion cabinet to the main cabinet when mounting the cabinets in a 19" relay rack. It is longer than the cable that is included with the expansion cabinet in order to accommodate the spacing...

SWITCH CONTROL PROCESSOR (SCP2) The Switch Control Processor (SCP2) is installed in slot 9 of the KSU and reduces the available universal card slots to eight. The SCP2 card is required when the system is to be expanded beyond a single cabinet or L...

LOCAL CONTROL PROCESSOR (LCP2) The Local Control Processor (LCP2) card is installed in a dedicated processor slot, slot 10, of each Expansion KSU and does not reduce the available universal card slots of that cabinet. The LCP2 card has positions for...

R2/CID-Tx MODULE (RCM2) The RCM2 Module installs in any position on any of the processor cards. The main purpose of the RCM daughter board is to provide Caller ID decoders for use with that telephone company provided service over analog trunks, and DSPs...

DC Battery cable only for IDCS 500 systems.

MODEM DAUGHTERBOARD The modem daughterboard plugs on to either the SMISC3 or SMISC4 Miscellaneous Card. This internal modem provides a 56k/V90 connection to the system for remote administration or programming. This card has a default extension number of...

AUTO ATTENDANT This optional card can be used for either the Automated Attendant, Uniform Call Distribution or a combination of both.

TRUNK B1 This card contains four loop start C.O. line interface circuits with C.O. disconnect detection. It also contains the circuitry needed for Caller ID. It can be inserted in any universal card slot in all cabinets.