Samsung iDCS 100, MISC4 Card
- SKU:
- KP100DBMI4/XAR
- MPN:
- KP100DBMI4/XAR
- Condition:
- Refurbished
- Availability:
- Available
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
SMISC4 - MISCELLANEOUS CARD
This optional card provides the following:
• A second MOH/BGM input
• Three general purpose relays
• One alarm sensor contact pair
• Four Caller ID DSP circuits for decoding analog CID
• Four Caller ID DSP circuits to generate CID to analog station ports
• Connectors for internal modem board
• SIO Port 1 control dedicated to internal modem. (Port not physically available on board. Port is internally rout-
ed to MCP-1 via 3-pin connector).
• 4 Port Automated Attendant
NOTE: Use either the SMISC3 or SMISC4 card but not both.
Related Products
Samsung iDCS 100, MISC3 Card
$125.00
SMISC3 - MISCELLANEOUS CARD This optional card provides the following: • A second MOH/BGM input
Samsung iDCS 100, SMCP1 Processor Card
$175.00
MAIN CONTROL PROCESSOR - SMCP1 To operate the KSU must be equipped with the SMCP1 card installed in the dedicated MEM slot. The SMCP1 pro- vides the following:
Samsung iDCS Modem Card
$35.00
MODEM DAUGHTERBOARD The modem daughterboard plugs on to either the SMISC3 or SMISC4 Miscellaneous Card. This internal modem provides a 56k/V90 connection to the system for remote administration or...
Samsung iDCS 100, MGI16 VoIP Gateway Card
$350.00
SMGI3 (MEDIA GATEWAY INTERFACE) The SMGI3 card supports up to 16 VoIP channels.There are 8 embedded on the card. An additional 8 channels can be added by pluging in the MGI3 Daughterboard.
Samsung iDCS 100, PLL Clocking Card Required for T1/PRI
$150.00
SPLL Daughter Board This daughter board is required to provide clocking for the TEPRI/TEPRIa card. If a TEPRI/TEPRIa card is to be installed an SPLL daughter board must also be installed.