Viking K-1700-3-EWP Handsfree Speaker Phone

The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone.

When the �Call� button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the �Call� button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available

For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

• Apartment or multi-tenant office entry when used with the K-1900-3 or C-3000
• Residential entry system when used with the C-2000
• Courtesy and customer assistance phone
• Automated teller (ATM�s) phone

• Vandal Resistant Features: 14 gauge, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and �Call� button
• Optional Enhanced Weather Protection (EWP)
• Yellow �in use� LED
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out
• Selectable auto-answer feature
• Selectable push button disconnect
• Zinc plated steel rough-in box with (2) 3/4� conduit knockouts
• Optional VE-6x7 Surface Mount Box available
• Selectable maximum call time
• Selectable VOX switching speed
• K-1700-3-EWP conforms to NEMA requirements
• Made in the USA
• 1 Year Warranty

• Power: Telephone line powered 20V DC/20mA minimum
• Dimensions:
• Overall: 140mm x 165mm x 66mm (5.5� x 6.5� x 2.6�) , Rough-in
• box: 114mm x 140mm x 64mm (4.5� x 5.5� x 2.5�)
• Shipping Weight: 1.6 kg (3.5 lbs)
• Environment: -26� C to 54� C (-15� F to 130� F) with up to 100% condensing humidity
• Speaker Volume: approximately 70 db maximum @1m
• Connections: Standard - (1) two-position terminal block, EWP - Gel-filled tip and ring connectors
• CPC Disconnect Time: 300ms minimum
• REN #: 0.5 A