DCS / DCS Compact

  2 circuit industry standard analog station card that installs into the dedicated SLI slot in the iDCS 100 telephone system. It is an economical way to add a couple of analog ports without using a universal card slot. It can also be used in the...

2 x 4 DLI This card provides two Caller ID-compatible loop start C.O. interfaces and four 1B+D DLI ports. KDb’s cannot be used with this card. This is the same card used on the DCS Compact and 50si.

2 x 4 SLI This card provides two Caller ID-compatible loop start C.O. Lines, four SLI ports for industry standard single line telephones and the ability to provide a loop disconnect signal.   NOTE: This card does not provide OPX protection. This is...

AUTO ATTENDANT This optional card can be used for either the Automated Attendant, Uniform Call Distribution or a combination of both.

TRUNK B1 This card contains four loop start C.O. line interface circuits with C.O. disconnect detection. It also contains the circuitry needed for Caller ID. It can be inserted in any universal card slot in all cabinets.

TRUNK C1 This card contains eight loop start C.O. line interface circuits with C.O. disconnect detection. It also contains the circuitry needed for Caller ID. It can be inserted in any universal card slot in all cabinets

Provides 4 Ground Start Telephone Lines with Disconnect Detection

Provides 4 Direct Inward Dialing (DID) Trunks

DLI This card is an eight circuit digital station interface card that provides 2B+D service when installed in any universal card slot in all cabinets. Keyset daughter boards will only work when connected to this card.

SLI This card is a four circuit analog station interface for industry standard single line telephones or other analog peripheral devices (voice mail, etc.). Each circuit is equipped with an analog DTMF receiver and provides the over-voltage protection...

8SLI This card is a eight circuit analog station interface for industry standard single line telephones or other analog peripheral devices. The 8SLI does not contain any over-voltage protection and is not qualified as OPX. It also does not contain DTMF...

8MWSLI This card is an eight circuit analog station interface for industry standard single line telephones that require operation of an industry standard message waiting lamp with a voltage range of 85 ~ 96 VDC. The lamp can be programmed to be on...