iDCS 100 / 500

S8DLI This card provides eight 1B+D DLI station ports. KDb’s cannot be used with this card

S8SLI This card provides eight SLI ports for industry standard single line telephones and the ability to provide a loop disconnect signal.

  2 circuit industry standard analog station card that installs into the dedicated SLI slot in the iDCS 100 telephone system. It is an economical way to add a couple of analog ports without using a universal card slot. It can also be used in the...

2 x 4 DLI This card provides two Caller ID-compatible loop start C.O. interfaces and four 1B+D DLI ports. KDb’s cannot be used with this card. This is the same card used on the DCS Compact and 50si.

2 x 4 SLI This card provides two Caller ID-compatible loop start C.O. Lines, four SLI ports for industry standard single line telephones and the ability to provide a loop disconnect signal.   NOTE: This card does not provide OPX protection. This is...

SMGI3 (MEDIA GATEWAY INTERFACE) The SMGI3 card supports up to 16 VoIP channels.There are 8 embedded on the card. An additional 8 channels can be added by pluging in the MGI3 Daughterboard.  The SMGI3 card has the following capabilities on a per...

SYSTEM CABINETS The cabinets that make up the OfficeServ 500 system are of metal construction and may be utilized as either as an expansion cabinet or as a main cabinet  key service unit KSU. The cabinets may be used individually or maybe stacked...

Overview Expansion kit used when expanding the iDCS 500 telephone system by adding one or two of the iDCS 500 Expansion Cabinets. The included Expanded Switch Module (ESM) is used to expand the time switch matrix from 512 channels in a single cabinet to...

Overview Expansion cabinet for the Samsung iDCS 500 telephone system. Includes Expansion cabinet Cable for connection to main cabinet Local Control Processor - LCP2 with 3 slots for the following: iDCS 500 RCM2 Caller ID Daughterboard iDCS 500...

MISCELLANEOUS FUNCTION MODULE (MISC) The Miscellaneous Function Module (MISC) daughter board installs in position MCP2-D3 on the MCP2 card in a single cabinet system or in position SCP2-D2 on the SCP2 or position LCP2-D2 on the LCP2 card(s) in a multiple...

SWITCH AND CONFERENCE MODULE (SCM) The Switch and Conference Module installs on the MCP2 or the SCP2 processor cards. In a single cabinet system the SCM can be installed in MCP2-D1, however in a multiple cabinet system the SCM must be installed on the...

Overview This cable is used for connecting the iDCS 500 expansion cabinet to the main cabinet when mounting the cabinets in a 19" relay rack. It is longer than the cable that is included with the expansion cabinet in order to accommodate the spacing...